Answered on Mar 23, This prevents incorrect insertion when you connect the IDE cable. Refer to the tables below. Remove the DIMM from the socket. Insufficient air flow within the system can damage the motherboard components. External no integrated graphics. This worked, but again there is no sound.
|Date Added:||17 August 2012|
|File Size:||32.57 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
If that does not do it, you have serious mo bo issues. Refer to the hard disk documentation for the jumper settings.
asus ptgd-la AUDIO drivers
Under Linux, use the Hyper-Threading compiler to compile the code. For dual-channel configuration you may: These are not jumpers!
The situation I am having is this. If you are in need of additional help, please let us know.
Motherboard layout and photos Figure: Simultaneously press the retaining clips outward to unlock the DIMM. The socket pttd1-la key should fit into the CPU notch.
If you install two hard disk drives, you must configure the second drive as a slave device by setting its jumper accordingly. After connecting one end to the motherboard, connect the other end to the floppy drive. With a 32 bit operating system the total addressable theoretical memory limit is 4 Sohnd. Answer ptgd1-l, earn points and help others Answer questions. Clearing the BIOS password. Plug the power cord and turn ON the computer. Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5.
Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.
Not finding what you are looking for? Sounr than the recommended configurations may cause memory sizing or system boot failure. To use the Hyper-Threading Technology on this motherboard: See your browser’s documentation for specific instructions.
HP and Compaq Desktop PCs – Motherboard Specifications, PTGD1-LA (Puffer2) | HP® Customer Support
Its easy to accidentally place them in the wrong pin. This prevents incorrect insertion when you connect the IDE cable. Reset button This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.
Yes, my password is: Any help is apreciated. In 4-channel, 6-channel, and 8-channel mode, the function of this port becomes front speaker out. Close the load plate Athen push the load lever B until it snaps into the retention tab. Do not change any jumper setting while the computer is on.
This worked, but again there is no sound. Soknd form factor, 9.